The HDMI over IP H.264/H.265 PoE Transmitter, 4K/60 allows HDMI source equipment to be extended locally up to 330ft (100m) at up to 4K @ 60Hz resolution via Cat5e/6 cable and is compatible with the Muxlab 500762-RX-V2 Receiver to support point-to-point, point-to-multipoint and multipoint-to-multipoint configurations, Video Wall and Multiview capabilities in a low bandwidth expandable and cost effective manner, without the need to install dedicated cabling systems. The exceptionally low bandwidth requirements of this device in the H.264/H.265 video codec setting allows for streaming audio/video content over a local network. The unit also supports a Motion JPG (MJPG) video codec setting for low latency applications. The transmitter accepts a 4K video @ 60Hz and streams the content to an H.264/H.265 Receiver, such as the MuxLab 500762-RX-V2, to be displayed on a 4K monitor. The Transmitter may also send H.264/H.265 video streams to other H.264/H.265 compatible Receiving devices. The device supports PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.
The HDMI over IP H.264/H.265 PoE Transmitter, 4K/60 allows HDMI source equipment to be extended locally up to 330ft (100m) at up to 4K @ 60Hz resolution via Cat5e/6 cable and is compatible with the Muxlab 500762-RX-V2 Receiver to support point-to-point, point-to-multipoint and multipoint-to-multipoint configurations, Video Wall and Multiview capabilities in a low bandwidth expandable and cost effective manner, without the need to install dedicated cabling systems. The exceptionally low bandwidth requirements of this device in the H.264/H.265 video codec setting allows for streaming audio/video content over a local network. The unit also supports a Motion JPG (MJPG) video codec setting for low latency applications. The transmitter accepts a 4K video @ 60Hz and streams the content to an H.264/H.265 Receiver, such as the MuxLab 500762-RX-V2, to be displayed on a 4K monitor. The Transmitter may also send H.264/H.265 video streams to other H.264/H.265 compatible Receiving devices. The device supports PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.
Related listings
